KAVAN Cumul 100 - Instruction manual
Precautions
This RC model is not a toy. Use it with care and strictly following the instructions in this manual.
Assemble this model following stricktly these instructions. DO NOT modify or alter the model. Failure to do so, the warranty will lapse automatically. Follow the instructions in order to obtain a safe and solid model at the end of the assembly
Children under the age of 14 must operate the model under the supervision of an adult.
Assure that the model is in perfect conditions before every flight, taking care that all the equipment works correctly and that the model is undamaged in its structure.
Fly only in days with light breeze and in a safe place away from any obstacles.
You must build the model according to the instructions. Do not alter or modify the model, as doing so may result in an unsafe or unflyable model. Take time to build straight, true and strong. Use proper radio and other equipment that is in first-class condition, properly install all the components and test their correct operation before the first and any further flight. Fly the model only with competent help from a well-experienced modeller if you are not already an experienced RC pilot.
Specification
Wingspan | 2540 mm |
Length | 1435 mm |
All-up weight | 750 g |
Wing section | AG 40–42 |
CG position | 77–81 mm |
Controls | Aileron, flap, rudder, elevator, (motor) |
Recommended RC equipment
- Aileron and flap servo: KAVAN GO-1023MG 4×
- Rudder and elevator servo: KAVAN GO-1020MG/GO-1021MG 2×
- Receiver battery: 2S LiPo 800–1000 mAh 7.4 V
Recommender RC equipment (electric)
- Aileron and flap servo: KAVAN GO-1023MG 4×
- Rudder and elevator servo: KAVAN GO-1020MG/GO-1021MG 2×
- Motor: KAVAN C2836-1120, KAVAN PRO 2836-1050 w. 10×6" folding propeller (32 mm spinner)
- ESC: KAVAN R-40SB, KAVAN PRO-30SB, KAVAN PRO-40SB
- Flight battery: 3S LiPo 750–850 mAh 11.1 V
Recommended glues
Unless stated otherwise, use medium cyanoacrylate (CA) glue (KAV56.9952 Power CA Medium). D-box sheeting and wing ribs are better to be glued using a water-resistant white aliphatic resin, like our KAV56.9960 White Glue SUPER (alternatively, you can use this sort of glue for most of the wood- -to-wood joints). The highly loaded parts (wing roots, wing main spars, firewall etc.) should be glued together using 30 minute (or slower) epoxy offering high strength and enough time for the correct positioning.