KAVAN Der mini Falke 710mm - Instruction manual

From KAVAN RC Wiki
Revision as of 07:53, 25 April 2024 by Mrs. Kavan (talk | contribs) (Created page with "== Introduction == The hand launch glider (HLG) Der Mini FALKE (Mini Falcon) has been designed with beginners looking for their very first model in mind. You will need some basic modeller's tools, glues and dopes – you will find these handy with any of your future projects as well. Please make yourself familiar with the building plans and this manual BEFORE you actually start the assembly. === Before you start === '''Glue:''' You can use solvent based modeller's glue...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Introduction

The hand launch glider (HLG) Der Mini FALKE (Mini Falcon) has been designed with beginners looking for their very first model in mind. You will need some basic modeller's tools, glues and dopes – you will find these handy with any of your future projects as well. Please make yourself familiar with the building plans and this manual BEFORE you actually start the assembly.

Before you start

Glue: You can use solvent based modeller's glue (UHU® Hart etc.), medium cyano (KAV9952 KAVAN Medium CA etc.) or water-resistant white glue (KAV9960 KAVAN White Glue etc.).

Dope: KAVAN Classic line Protective Dope (KAV9988) and Thinner (KAV9990) are highly recommended.

Tools and accessories: You will need a perfectly flat building board (at least 150×700 mm), builder's triangle, sanding blocks/sponges with 180–200 and 360–400 grit sandpaper, model hobby pins (KAV0355 modeller's pins), soft flat (1/4"–3/8") brush, thin clear plastic film to protect the building plan/building board (a large PE bag cut open will work).

Retrieved from "https://wiki.kavanrc.com/w/index.php?title=KAVAN_Der_mini_Falke_710mm_-_Instruction_manual&oldid=8552"