Translations:KAVAN Alpha 1500 V2 - Instruction manual/207/de

From KAVAN RC Wiki
Revision as of 08:04, 29 April 2024 by Mrs. Kavan (talk | contribs) (Created page with "==== Wie ist das Modell zu steuern? ==== Im Gegensatz zu Autos und Booten fliegt ein Flugzeug in dreidimensionalem Raum, das das steuern schwieriger macht. Das Drehen des Steuerrades nach links oder rechts veranlasst das Auto oder das Boot nach links oder rechts zu fahren. Mehr gas beschleunigt das Gefährt – und das ist es schon. Das Bewegen der Steuerknüppel nach links oder rechts hat mehr Effekt als nur das Drehen des Modells. Die Quer- und Seitenruder Steuerung wi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Wie ist das Modell zu steuern?

Im Gegensatz zu Autos und Booten fliegt ein Flugzeug in dreidimensionalem Raum, das das steuern schwieriger macht. Das Drehen des Steuerrades nach links oder rechts veranlasst das Auto oder das Boot nach links oder rechts zu fahren. Mehr gas beschleunigt das Gefährt – und das ist es schon. Das Bewegen der Steuerknüppel nach links oder rechts hat mehr Effekt als nur das Drehen des Modells. Die Quer- und Seitenruder Steuerung wird später erklärt.

Hinweis: Die Steuerung ist proportional – je mehr Sie den Knüppel bewegen, desto mehr Ruderausschlag ergibt es. Die effektiv benötigte Ruderbewegung ist meist ganz klein und niemals von einem Vollausschlag zum Anderen!

Elevator controls the model in the vertical axis. Push up the elevator and your model’s nose will rise (and the model will climb if it has sufficient power). Pull down the elevator and your model will descend. Please note that your model can only climb if it has sufficient power applied. Your model will not necessarily climb simply because you have pushed up the elevator, and will normally need full power applied for a safe gentle climb. If the climb angle is too great, or the power applied is insufficient, your model will lose flying speed until the minimum (stall) speed. At the stalling speed (when the airflow starts to break away from the upper surface of the wing), your model will start to feel as though it is not responding as normal to control inputs, and then drop with little warning – apply down elevator to regain flying speed and full normal control.