KAVAN Smart PRO USB-C interface - Instruction manual: Difference between revisions
Mrs. Kavan (talk | contribs) (Created page with "== Introduction == Congratulations on purchasing the '''KAVAN Smart PRO USB-C interface''' used to connect your USB-equipped Smart PRO devices to your PC. This allows you to save or analyse your data or to update the firmware of your devices.") |
Mrs. Kavan (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
Congratulations on purchasing the '''KAVAN Smart PRO USB-C interface''' used to connect your USB-equipped Smart PRO devices to your PC. This allows you to save or analyse your data or to update the firmware of your devices. | Congratulations on purchasing the '''KAVAN Smart PRO USB-C interface''' used to connect your USB-equipped Smart PRO devices to your PC. This allows you to save or analyse your data or to update the firmware of your devices. | ||
=== Features === | |||
* '''Dimensions:''' 33×12×6 mm | |||
* '''Weight:''' 2 g | |||
* '''USB connector:''' MINI USB Typ B (USB 2.0) | |||
* '''Current:''' 25mA | |||
* '''Supply voltage:''' 5V | |||
* '''Output current:''' 130mA | |||
* '''Chip:''' Silicon Labs CP2102 | |||
* '''Transmission speeds:''' up to 1Mbps | |||
* '''Operating temperature:''' -20–85°C | |||
=== Installation === | |||
Connect the USB interface to your PC/laptop using a USBA to Mini B cable. The software drivers are usually installed automatically by the operating system and the interface appears in the Device Manager as a virtual COM port. | |||
If the drivers are not installed automatically, please follow the link below and install them manually: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers | |||
== Firmware update == | |||
Firmware updates for the device are transferred from a PC via the USB interface. | |||
The required programs and files are available at [https://www.mavsense.com/ www.mavsense.com]. | |||
Install the MAV Manager software and the USB drivers on your computer. Check the system requirements. | |||
# Disconnect all accessories from device. | |||
# Connect the USB interface to your PC, run MAV Manager and select the correct COM Port. | |||
# Connect the device according to the picture below. | |||
# Select the *.BIN file and press the Update button. | |||
Revision as of 07:45, 16 October 2024
Introduction
Congratulations on purchasing the KAVAN Smart PRO USB-C interface used to connect your USB-equipped Smart PRO devices to your PC. This allows you to save or analyse your data or to update the firmware of your devices.
Features
- Dimensions: 33×12×6 mm
- Weight: 2 g
- USB connector: MINI USB Typ B (USB 2.0)
- Current: 25mA
- Supply voltage: 5V
- Output current: 130mA
- Chip: Silicon Labs CP2102
- Transmission speeds: up to 1Mbps
- Operating temperature: -20–85°C
Installation
Connect the USB interface to your PC/laptop using a USBA to Mini B cable. The software drivers are usually installed automatically by the operating system and the interface appears in the Device Manager as a virtual COM port.
If the drivers are not installed automatically, please follow the link below and install them manually: https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
Firmware update
Firmware updates for the device are transferred from a PC via the USB interface.
The required programs and files are available at www.mavsense.com.
Install the MAV Manager software and the USB drivers on your computer. Check the system requirements.
- Disconnect all accessories from device.
- Connect the USB interface to your PC, run MAV Manager and select the correct COM Port.
- Connect the device according to the picture below.
- Select the *.BIN file and press the Update button.