KAVAN Smart PRO SE6 6ch BUS servo decoder - Instruction manual: Difference between revisions
Mrs. Kavan (talk | contribs) |
Mrs. Kavan (talk | contribs) |
||
| Line 7: | Line 7: | ||
* Multiplex: SRXL 12ch, SRXL 16ch | * Multiplex: SRXL 12ch, SRXL 16ch | ||
* PowerBox: P²Bus | * PowerBox: P²Bus | ||
==== Features ==== | |||
* Small dimensions and high current throughput via the integrated MR30 power connector | |||
* Automatic detection of serial data/telemetry after startup | |||
* Configuration through the transmitter, external terminal (JETIBOX/SMART-BOX) or MAV Manager PC software | |||
* Firmware updates via USB interface | |||
Revision as of 14:15, 16 October 2024
Introduction
Congratulations on purchasing the KAVAN Smart PRO SE6 4ch BUS servo decoder, a device that converts serial bus signals to standard PWM servo outputs. It offers up to six configurable servo outputs with optional period and fail-safe settings. The SE6 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of receiver channels simply connect the SE6 to the receiver serial line and freely assign its own output channels.
Supported protocols:
- Futaba: S.Bus/S.Bus2
- Graupner: SUMD, Hott telemetry for setting
- JETI: EX Bus
- Multiplex: SRXL 12ch, SRXL 16ch
- PowerBox: P²Bus
Features
- Small dimensions and high current throughput via the integrated MR30 power connector
- Automatic detection of serial data/telemetry after startup
- Configuration through the transmitter, external terminal (JETIBOX/SMART-BOX) or MAV Manager PC software
- Firmware updates via USB interface