KAVAN Smart PRO SE6 6ch BUS servo decoder - Instruction manual: Difference between revisions
Mrs. Kavan (talk | contribs) (Created page with "=== Introduction === Congratulations on purchasing the '''KAVAN Smart PRO SE6 4ch BUS servo decoder''', a device that converts serial bus signals to standard PWM servo outputs. It offers up to six configurable servo outputs with optional period and fail-safe settings. The SE6 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of rece...") |
Mrs. Kavan (talk | contribs) |
||
| Line 1: | Line 1: | ||
=== Introduction === | === Introduction === | ||
Congratulations on purchasing the '''KAVAN Smart PRO SE6 4ch BUS servo decoder''', a device that converts serial bus signals to standard PWM servo outputs. It offers up to six configurable servo outputs with optional period and fail-safe settings. The SE6 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of receiver channels simply connect the SE6 to the receiver serial line and freely assign its own output channels. | Congratulations on purchasing the '''KAVAN Smart PRO SE6 4ch BUS servo decoder''', a device that converts serial bus signals to standard PWM servo outputs. It offers up to six configurable servo outputs with optional period and fail-safe settings. The SE6 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of receiver channels simply connect the SE6 to the receiver serial line and freely assign its own output channels. | ||
==== Supported protocols: ==== | |||
* Futaba: S.Bus/S.Bus2 | |||
* Graupner: SUMD, Hott telemetry for setting | |||
* JETI: EX Bus | |||
* Multiplex: SRXL 12ch, SRXL 16ch | |||
* PowerBox: P²Bus | |||
Revision as of 14:13, 16 October 2024
Introduction
Congratulations on purchasing the KAVAN Smart PRO SE6 4ch BUS servo decoder, a device that converts serial bus signals to standard PWM servo outputs. It offers up to six configurable servo outputs with optional period and fail-safe settings. The SE6 is a perfect choice for models with complex wing or tail mechanics where multiple servos may be connected to a primary receiver using just a single cable. In addition, if you are running out of receiver channels simply connect the SE6 to the receiver serial line and freely assign its own output channels.
Supported protocols:
- Futaba: S.Bus/S.Bus2
- Graupner: SUMD, Hott telemetry for setting
- JETI: EX Bus
- Multiplex: SRXL 12ch, SRXL 16ch
- PowerBox: P²Bus