KAVAN ET-01 Electric screwdriver - Instruction manual
Introduction
Congratulations on purchasing the KAVAN Electric screwdriver. This RC power tool is intended for tightening and loosening the screws.
Technical specifications
| Battery | Li-ion 3.6 V 900 mAh / 3.24 Wh |
| No-load Speed | 280 RPM |
| Torque | 2 Nm (electric) / 10 Nm (manual) |
| Chuck | 6.35 mm hex quick-release |
| USB charger input | 5 V / min. 500 mA (0.5 A) |
| Charging Time | ≈ 60 minutes (with power supply >1 A) |
| Operating time | ≈ 40 minutes |
| Weight | 150 g |
Safety warnings
- Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury and property damage.
- Keep work area clean and well lit.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
- Keep children and bystanders away while operating a power tool.
- Do not expose power tools to rain or wet conditions.
- Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
- Use personal protective equipment. Always wear eye protection.
- Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
- When stored: Keep out of reach of children.