-
491 bytes (84 words) - 13:27, 11 December 2024
-
315 bytes (54 words) - 13:27, 11 December 2024
...'''Note:''' We, as a kit manufacturer, can guarantee you a premium quality kit with detailed instructions, but flight characteristics and performance depe
...
420 bytes (68 words) - 13:27, 11 December 2024
...initial high start, set the towhook to the forward position. Based on the DINGO's behaviour you can move it back/adjust later. If your model hesitates to c
...
563 bytes (99 words) - 13:27, 11 December 2024
-
403 bytes (69 words) - 13:27, 11 December 2024
-
751 bytes (137 words) - 13:27, 11 December 2024
|'''All-up weight'''
...
125 bytes (12 words) - 13:27, 11 December 2024
=== The kit contents ===
|Instruction manual
...
2 KB (199 words) - 13:27, 11 December 2024
-
219 bytes (43 words) - 13:27, 11 December 2024
-
348 bytes (64 words) - 13:27, 11 December 2024
-
16 bytes (1 word) - 13:27, 11 December 2024
...wn onto the top view on the building plan placed on your work bench. Double-check the tail boom and the entire fuselage was true and straight. The tail
...
825 bytes (149 words) - 13:27, 11 December 2024
...nose pitches up put in as much of additional ballast (not supplied in the kit) to the nose as necessary (you can use small screws, modelling clay etc.).
...
1 KB (199 words) - 13:27, 11 December 2024
* Before you apply the glue, please, always double-check the correct size, shape and alignment of the particular part.
* Balsa and spruce sticks are intentionally supplied oversized in the kit. Pin the stick to the plan overlapping at both ends – you will cut/sand the
...
636 bytes (107 words) - 13:27, 11 December 2024
...''35''' into the fuselage. Drill the hole for the horizontal tailplane hold-down dowel '''34''' (bamboo ø2.5×25 mm) using 2.5 mm drill bit (10 mm deep)
...
1 KB (213 words) - 13:27, 11 December 2024
-
192 bytes (32 words) - 13:27, 11 December 2024
-
225 bytes (40 words) - 13:27, 11 December 2024
...vers '''33''' in place matching the outline of the fuselage. Glue the cross-brace '''38''' (balsa 6×8×20 mm) between the tail boom sticks '''23'''. Glue
...
409 bytes (70 words) - 13:27, 11 December 2024
...ts as well. Please make yourself familiar with the building plans and this manual BEFORE you actually start the assembly.
...
415 bytes (69 words) - 13:27, 11 December 2024
-
563 bytes (105 words) - 13:27, 11 December 2024
...Cumul 100 glider kit 2540mm - Instruction manual | Cumul 100 - Instruction manual]]
...AN Cumul DLG ARF 1096mm - Instruction manual | Cumul DLG ARF - Instruction manual]]
...
1 KB (152 words) - 11:51, 17 December 2025
KAVAN Dingo A3 glider kit 796mm - Instruction manual
...
52 bytes (9 words) - 10:09, 16 October 2025
* [[KAVAN Cumul 100 glider kit 2540mm - Instruction manual/de | Cumul 100 - Bauanleitung]]
* [[KAVAN Cumul DLG ARF 1096mm - Instruction manual/de | Cumul DLG ARF - Bauanleitung]]
...
1,001 bytes (151 words) - 12:03, 17 December 2025
* [[KAVAN Cumul 100 glider kit 2540mm - Instruction manual/fr | Cumul 100 - Manuel d'instructions]]
* [[KAVAN Cumul DLG ARF 1096mm - Instruction manual/fr | Cumul DLG ARF - Manuel d'instructions]]
...
1 KB (165 words) - 12:09, 17 December 2025
* [[KAVAN Cumul 100 glider kit 2540mm - Instruction manual/cs | Cumul 100 - Návod ke stavbě]]
* [[KAVAN Cumul DLG ARF 1096mm - Instruction manual/cs | Cumul DLG ARF - Návod ke stavbě]]
...
1 KB (186 words) - 11:57, 17 December 2025
