KAVAN Beta 1400 Kit - Instruction manual
Introduction
Congratulation on your purchase of the BETA 1400 motor powered glider. You are about to embark on a magical journey into the fascinating world of electric powered RC aeroplanes. The BETA 1400 manufactured of the virtually unbreakable EPO foam packed with the latest 2.4GHz radio technology and powered with a mighty brushless motor and LiPo batteries will help to become an experienced pilot in no time! BETA 1400 is not just an entry level plane but actually a quite good thermal glider that will please any Sunday pilot – a newcomer as well as a seasoned pro!
Features
- Builder’s kit, EPO foam parts
- Aileron, elevator, rudder and throttle control
- Easy handling and high stability, durable, virtually unbreakable electric motor powered glider
- Powerful brushless outrunner motor (not supplied in the kit)
- Large wing area, low weight
- Lightweight LiPo flight pack (not supplied in the kit)
Technical specifications
| Wingspan | 1400 mm |
| Length | 966 mm |
| All-up weight | 700–770 g |
| Wing Area | 24.5 dm² |
| Wing Loading | 28.6–31.4 g/dm² |
| Motor | C2814-1400 outrunner |
| ESC | KAVAN R-20B 20 A with BEC 5 V |
*) Not supplied in the kit.
Precautions
This RC model is not a toy. Use it with care and strictly follow the instructions in this manual.
Assemble this model following strictly these instructions. DO NOT modify or alter the model. Failure to do so, the warranty will lapse automatically. Follow the instructions to obtain a safe and solid model at the end of the assembly.
Children under the age of 14 must operate the model under the supervision of an adult.
Assure that the model is in perfect condition before every flight, taking care that all the equipment works correctly and that the model is undamaged in its structure.
Fly only on days with a light breeze and in a safe place away from any obstacles.
Safety precautions
General Warnings
An RC aeroplane is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in a safe place, following all instructions and recommendations in this manual. Beware of the propeller! Keep loose items that can get entangled in the propeller away from the spinning propeller, including loose clothing or other objects such as pencils and screwdrivers. Ensure that your and other people’s hands and face are kept away from the rotating propeller.
Note on Lithium Polymer Batteries
Lithium Polymer batteries are significantly more vulnerable than alkaline or NiCd/NiMH batteries used in R/C applications. All manufacturer’s instructions and warnings must be followed closely. Mishandling of LiPo batteries can result in fire. Always follow the manufacturer’s instructions when disposing of Lithium Polymer batteries.
Additional Safety Precautions and Warnings
As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself and others or result in damage to the product or the property of others. This model is controlled by a radio signal subject to interference from many sources outside your control. This interference can cause momentary loss of control, so it is advisable to always keep a safe distance in all directions around your model, as this margin will help to avoid collisions or injury.
Never operate your model with low transmitter batteries.
Always operate your model in an open area away from power lines, cars, traffic, or people.
Avoid operating your model in populated areas where injury or damage can occur.
Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable batteries, etc.) which you use.
Keep all chemicals, small parts and anything electrical out of the reach of children.
Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and protected for this purpose.
Never lick or place any portion of your model in your mouth, as it could cause serious injury or even death.
Kit contents
- EPO foam moulded parts
- small accessories
- 7×6" folding prop and spinner
- 2 sheets of stickers
You will also need the following accessories and tools (not included in the kit)
RC set, power unit, battery
- at least a 4-channel transmitter and receiver
- LiPo flight pack 11.1 V 1600–2700 mAh
- KAVAN C2814–1400 brushless motor or similar
- KAVAN R–20B 20 A ESC or similar
- 4× KAVAN GO–09 servos or similar
- short Y-cable or 2× 20–30 cm extension cable
Tools
- small Phillips and flat screwdrivers
- 1.5 mm Allen key or screwdriver
- hot melt glue gun
- sandpaper No. 150–200
Glue
- medium or thick cyanoacrylate glue (e.g. KAV9952 or KAV9953)
- low or medium strength thread locker (blue - e.g. KAV9970)
- hot melt glue or MS polymer glue (e.g. BISON Poly Max®, Soudal T-Rex®)
- clear sticky tape